J--Electrical Voltage Testing

This Statement of Work (SOW) describes the requirements for the maintenance, inspection, testing, and/or calibration of the Electrical Power Distribution System and all its components for the Montgomery and Tuskegee Campuses. These work items are referenced as “Maintenance and Testing” in this document, hereafter this SOW describes the requirements to establish maintenance and testing reports: a. Service to provide three-year electrical testing of high voltage, medium voltage and low voltage system panel, breakers, disconnects and all items as listed below. Electrical distribution system is located at the Central Alabama Veterans Health Center System (CAVHCS), 215 Perry Hill Road, Montgomery, Al. 36109 3798. Work is to be performed between April -June 2019 time frame after normal working hours. b. Supplies and services: Professional testing and maintenance of electrical systems and equipment. Furnish all labor, equipment and supplies necessary to provide electrical analysis to include specialized testing, inspecting, cleaning, adjusting and appraising of electrical distribution system and apparatus to assure their reliable operation. Testing shall be performed in compliance with manufacturer’s recommendations and applicable NEMA, NEC, ANSI, ASTM, ASA, and VA standards. c. Scope should include professional testing and maintenance of the following electrical systems and equipment: Switch gear equipment, medium voltage circuit breakers, load test high voltage equipment, infrared panels, eleven (11) 13K pad mount switches, eleven 13 K pad mount transformers and manholes, load study, protective relays primary disconnects, transformers, low voltage circuits breakers and generators, thirteen (13) transfer switches, two (2) double ended switchboards, one (1) generator switchboard, forty two (42) main distribution panels, two hundred and ten (210) secondary distribution panels, and five (5) manholes. One (1) 13 K double ended switchboard, with eight (8) 1200 amp. breakers.

Division 01 -	General Requirements, Quality Control, Testing and Inspecting Services.
Division 26 -	Electrical.