Ogdensburg-Prescott International Bridge U.S. Plate Girder Approach Spans Painting and Steel Repairs and U.S. Truss Approach Spans Deck and Floorbeams Replacement

Work includes providing all labor, materials, machinery, tools, equipment and other means of construction necessary and incidental to the completion of the work shown on the plans and described in these specifications including, but not necessarily limited to the following: This element specific project addresses the accelerating deterioration of the U.S. Approach Plate Girder Spans 1 to 8 that are subject to tire-carried winter deicing salts that pass through the open grid steel deck onto the floorbeams and plate girders below. This project will rehabilitate the original steel floorbeams where necessary and provide for blast cleaning and painting of all steel within Spans 1 to 8. In addition, additional funding at this time has allowed for the replacement of the U.S. Approach Truss Spans 9-14 deck and floorbeams. EEO Employment goals for this project are: 2.5% Minority Employment Goal & 6.9% Women Employment Goal.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.