PHCD Vacant Unit Preparations 2022 - North Area

The purpose of this Contract is to prepare selected vacant units throughout PHCD for occupancy. Vendor will be bidding to complete (Move-In Ready) vacant units, varying from 0br,1br, 2br, 3br,4br, & 5br. The locations are attached at the Form Of Bid Section of the Bid packet. Work shall be done in an expedited manner. Work duration will be 90 calendar days to complete all vacant unit's repairs. Contractors must have the labor force capacity to complete the project timely. The following are, at a minimum, the steps to preparing a vacant unit: Contractor shall be responsible for any initial clearing / cleaning of any vacant unit prior to the preparations. the Contractor will be responsible for getting their own bulk trash dumpster (40 yarder) for the debris from the units placed at an agreed spot on any property belonging to PHCD between the Maintenance Supervisor and or the Site Manager and the contractors representative. Dumpster must be cleared out once the dumpster has reached its maximum level to avoid any fines. Vendor shall be responsible for any dumping fines if it pertains to the dumpster that was rented by the contractor, no exceptions. Pre-Clean entire unit thoroughly with water & disinfectant cleaner (i.e. bathroom area, kitchen cabinets / area, windows and sills, light fixtures and globes and outlets and switches, water-heater and closet) Work to Be Performed (Includes): Carpentry, Plumbing, Electrical systems, Plaster, Paint, Final Cleaning. Please see constructions document for the full scope of work. Contractors shall provide separate money orders or cashier's checks per contracts. Contractor must refer to the Request for Price Quotation (RPQ) and associated project documents for the detail Scope of Work.

Single-Family Homes, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 03 -	Concrete, Cast-in-Place Concrete.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.