56-- NEW Requirement - ASBESTOS ABATEMENT - USCG STATION OSWEGO

NEW Requirement- ASBESTOS ABATEMENT- USCG STATION OSWEGO - Contractor will be responsible for supplying licensed personnel for the safe removal of approximately 1,700 square feet of asbestos tiles, carpet, and mastic glue in 06 rooms from living areas in the top floor of the main building in accordance with New York State Industrial Code 56. - The asbestos abatement contractor shall supply all labor, materials, services, permits, equipment, utility and transportation services required and necessary for the removal, transportation and disposal of ACM’s (Asbestos Containing Materials) throughout the 06 rooms. The location of known ACM is the floor tiles, carpeting and mastic glue throughout all rooms. - The Contractor shall be responsible for field verifying all conditions and quantities that may affect his work prior to bidding this project. - All procedures and equipment used must provide containment of asbestos debris and not allow airborne contamination of adjacent areas. - The Contractor shall provide the procedure to be followed for handling asbestos waste on removal, packaging, transport and disposal to ensure they comply with the requirements of Code of Federal Regulations 40, Part 61, Subparts A and M. - The Contractor shall submit material safety data sheets (MSDS) and manufacturer’s literature for all products intended to be used on this project. - Contractor will employ thorough cleanup procedures to properly control the ACM. - Contractor will be responsible for clean up of all debris and materials and returning the work area to a level of cleaniliness at or beyond the state of the area prior to project start.

Division 02 -

Existing Conditions, Hazardous Material Assessment, Site Remediation, Contaminated Site Material Removal, Asbestos Remediation, Asbestos Abatement, Removal and Disposal of Asbestos Containing Materials.