Replacement of Ridge Road Over Yawger Creek Bridge

The project includes removing the existing superstructure and substructure and replacing with an 85’ multi-girder simple span bridge on a similar vertical and horizontal alignment. The conventional substructures will be cast-in-place concrete founded on bedrock Medium stone fill will be installed as slope protection. Approximately 350’ of full depth approach reconstruction will be completed on Ridge Road and an additional 85’ along Large Road. New bridge and approach guide railing will be installed within the project limits.

Bridge, Renovation.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.