Wastewater Treatment Plant Improvements 2021

The Project is located at 1212 River Forest Rd., Evansdale, IA and includes the following Work: 1. Wastewater Treatment Plant site earthwork, approximately 11,000 CY, including flood protection berm, site grading, and excavation for structure foundations. 2. Construction of new Headworks Building housing plant power distribution, controls, laboratory, screening, grit removal, flow measurement, and flow control equipment. 3. Construction of new Anaerobic and Anoxic Treatment basins, and Internal Mixed Liquor Recycle lift station. 4. Construction of a new UV Disinfection Building and plant effluent lift station. 5. Construction of new flow control structure and treatment plant return lift station. 6. Site work, site restoration, crushed stone paving, miscellaneous piping, and other miscellaneous work. 7. Standby power systems at the Wastewater Treatment Plant. 8. Electrical, Instrumentation and Controls. 9. All other work required by the Contract Documents. Site Directions: The Project is located at 1212 River Forest Rd., Evansdale, IA. All bids must be filed in the office of the City Clerk before the time herein set, on forms furnished by the Owner, and must be enclosed in a separate sealed envelope and plainly identified. Each bid shall be accompanied by bid security as defined in Iowa Code Section 26.8, and in the amount of 5% of the total amount of the bid, as specified in the Bidding Documents, as security that if awarded a contract, the bidder will enter into a contract at the prices bid and furnish the required performance and payment bonds and Certificate of Insurance. Each successful Bidder will be required to furnish Performance and Payment Bonds acceptable to the Owner on forms provided in the specifications in amounts equal to one hundred percent (100%) of the contract price. Work on the improvement shall commence within 30 days after the Effective Date of the Contract, or on the day indicated in the Notice to Proceed. The Notice to Proceed will be issued upon approval of the contract and bonds by the City Council and be completed as stated below. The work on the UV Disinfection System shall be substantially completed on or before March 15, 2024, all other work shall be substantially completed on or before December 31, 2024 and the work shall be completed and ready for final payment in accordance with Paragraph 15.06 of the General Conditions on or before June 1, 2025. Failure to meet either the Substantial Completion dates or Final Completion date will result in liquidated damages of $1,500.00 per calendar day. To the extent allowed by Federal law and regulation, and to the extent required by Iowa law, a resident bidder shall be allowed a preference as against a nonresident bidder from a state or foreign country if that state or foreign country gives or requires any preference to bidders from that state or foreign country, including but not limited to any preference to bidders, the imposition of any type of labor force preference or any other form of preferential treatment to bidders or laborers from that state or foreign country. The preference allowed shall be equal to the preference given or required by the state or foreign country in which the nonresident bidder is a resident. In the instance of a resident labor force preference, a nonresident bidder shall apply the same resident labor force preference to a public improvement in this state as would be required in the construction of a public improvement by the state or foreign country in which the nonresident bidder is a resident. Failure to submit a fully completed Bidder Status Form with the Proposal may result in the Proposal being deemed nonresponsive and rejected. The Owner hereby reserves the right to reject any or all bids, to waive informalities and irregularities, and to enter into such contract or contracts as it shall deem to be in the best interest of the City. By virtue of statutory authority, a preference will be given to products and provisions grown and coal produced within the state of Iowa. Prospective Bidders may obtain or examine the Bidding Documents at the Issuing Office on Monday through Friday between the hours of 7:30 AM and 4:30 PM, and may obtain copies of the Bidding Documents from the Issuing Office as described below. Partial sets of Bidding Documents will not be available from the Issuing Office. Neither Owner nor Engineer will be responsible for full or partial sets of Bidding Documents, including addenda, if any, obtained from sources other than the Issuing Office. Printed copies of the Bidding Documents may be obtained from the Issuing Office by paying a deposit of $150 for each set. Bidders who return full sets of the Bidding Documents in good condition within 10 days after receipt of Bids will receive a full refund. Non-Bidders, and Bidders who obtain more than one set of the Bidding Documents, will receive a refund of the deposited amount for documents returned in good condition within the time limit indicated above. Make deposit checks for Bidding Documents payable to McClure Engineering Company

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware, Vents.
Division 09 -	Finishes, Tiling, Flooring, Resilient Flooring, Painting and Coating, Painting.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings, Specialty Casework, Laboratory Casework, Countertops, Laboratory Countertops, Institutional Furniture, Laboratory Furniture.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Facility Water Distribution, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers, Gas and Vacuum Systems for Laboratory and Healthcare Facilities, Compressed-Air Systems for Laboratory and Healthcare Facilities, Vacuum Systems for Laboratory and Healthcare Facilities, Gas Systems for Laboratory and Healthcare Facilities, Chemical-Waste Systems for Laboratory and Healthcare Facilities, Processed Water Systems for Laboratory and Healthcare Facilities.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, HVAC Fans, Central HVAC Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.