Splash Pad Resurfacing at Liberty Park

Removal of Existing Surface and Base Preparation: 1. The Contractor shall remove current base and scrap off excess polyurethane left after removal of current base. 2. The Contractor shall prepare, clean, and ensure a proper base is provided to accept and properly bind to the rubberized surface material as per new surfacing manufacturer’s specifications. 3. Any imperfections in the surface will be corrected by the Contractor using a compatible permanent filler before applying the rubberized surface material. 4. Any deficiencies in the concrete base surface will be repaired by the Contractor. 5. Once the existing rubberized surface material has been removed, the Contract is to arrange an inspection of the concrete base by the Contract Administrator. 6. The Contractor shall remove and lawfully dispose of the existing rubberized surface and debris from the splash pad area. Installation: 1. The Contractor shall install Equitan W Flooring System (1/2") Splash Pad or approved Equivalent. 2. The Contractor shall install a pitch to the drain in the splash pad. 3. The Contractor shall install extra cushioning of 40 sq. ft of buffing in front of the slide.

Park/Playground, Renovation.

Division 11 -	Equipment, Play Field Equipment and Structures, Playground Equipment, Play Structures.
Division 31 -	Earthwork, Selective Clearing, Grading.
Division 32 -	Exterior Improvements, Athletic and Recreational Surfacing, Site Improvements, Fences and Gates, Planting.
Division 33 -	Utilities.