Similar Projects
Design, Fabrication, and Furnishing of Metal Railings for Diamond Hill Park
Bidding
Cumberland, RI 02864

Exterior Improvements to Knotty Oak Village
Post-Bid
Coventry, RI 02816

Glen Manor House - New Awning And New Roll Curtains
Post-Bid
Portsmouth, RI

Siding And Trim Replacement At West Warwick Manor
Results
$30,000 to $45,000 est. value
West Warwick, RI 02893

Hannaway Blacksmith Shop Exterior Repairs and Painting
Results
Lincoln, RI 02865

Storage Building Roof Safety Rail
Post-Bid
Providence, RI 02905

Main Street Rhode Island Streetscape Business Storefront Improvement Grant - Storefront Facade Improvement
Results
Providence, RI

On-Call Replacement of Shelter Glass
Post-Bid
Providence, RI 02907

Springbrook Stair Railing Replacement and Facade Restoration
Results
Less than $35,000 est. value
Westerly, RI

Concrete Wall Replacement
Post-Bid
Woonsocket, RI 02895

Esek Hopkins Homestead Restoration Project
Results
Providence, RI 02904

Lincoln Manor - Exterior Improvements
Post-Bid
Lincoln, RI 02865

Removal and Replacement of a Flagpole
Results
$25,000 to $100,000 est. value
Newport, RI 02841

Stair Tread Upgrade - CCRI Knight Campus
Results
Warwick, RI 02886

Water Infiltration Repairs at West Warwick Manor
Results
Less than $271,000 est. value
West Warwick, RI 02893

Reported 03/01/2020 12:00 AM
Project Title

Installation of Bird Deterrent System

Physical Address View project details and contacts
City, State (County) Newport, RI   (Newport County)
Category(s) Single Trades
Sub-Category(s) Finishes/Exterior
Contracting Method Competitive Bids.
Project Status Bidding
Bids Due View project details and contacts
Estimated Value Less than $25,000
Plans Available from Federal Agency
Owner View project details and contacts
Architect View project details and contacts
Description

The contractor shall provide a bird netting deterrent system that will discourage and keeps birds from nesting in the canopy for the navy lodge. Bird netting shall be knotted, U.V. resistant polyethylene material in a matte black finish. Netting twine shall have a knotted breaking strength of at least 75 lbs. with a maximum ¾” square mesh size. The cable framework shall be a maximum 1/16” diameter stainless steel and shall be supported by stainless steel reversible screw eyes with an inside eye diameter not exceeding 3/16”. Netting to framework connectors shall be stainless steel crimps with a maximum closed inside diameter of 3/16 “. Access panels will need to be installed to allow for light maintenance. See enclosures.

Details

Division 09 - Finishes.
Division 11 - Equipment.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents