Water Well No.1 Rework and Water Plant Improvements 2020

Water Plant: The work at the Water Plant includes providing bonds and insurance; removing and inspecting the pumping equipment; disposing of equipment not to be reused; replacing the pump and motor; sounding the lap; performing any necessary mechanical rehabilitation to the well; replacing all column assembly components and accessories to a pump setting of 480 feet (480’); installing the pump, motor, column assembly and accessories; bacteriological testing; performing water well performance test; disinfecting the water well; performing water sampling and testing after reinstallation of pumping equipment; preparation, implementation, and record keeping of a Storm Water Pollution Prevention Plan; restoring site grading to original or better condition and hydromulching all areas within the plant site and all other adjacent areas disturbed during this construction; recoating the 12” check valve at Booster Pump No. 1; recoating the discharge head, the 12” check valve, and the 12” gate valve at Booster Pump No. 2; recoating the discharge head, the 12” check valve, and the 12” gate valve at Booster Pump No. 3; recoating the 12” gate valve at Booster Pump No. 4; wire brushing and cold spray galvanizing the outdoor aboveground booster pump piping; recoating the bottom flange, bottom 12” of tank, and replacing the foundation sealant of corroded areas of Ground Storage Tank No. 2; replacing the foundation sealant on Ground Storage Tank No. 1; constructing a concrete swale between Ground Storage Tank No. 2 and the existing swale; and all items needed for a completely functioning water plant. Remote Water Well No. 2: The work at Remote Water Well No. 2 includes blasting and recoating the aboveground water well piping including the 12” check valve, the 12” spool piece at the flow meter, the 8” gate valve, the 12” gate valve, and the spool at ground level; wire brushing and cold spray galvanizing the aboveground well galvanized piping; installing a canopy over the existing motor control center (MCC), as specified and shown on plans; constructing a crushed concrete turnaround, as specified and shown on plans; and all items need for a completely functioning water well.

Division 02 -	Existing Conditions, Subsurface Investigation, Geotechnical Investigations, Subsurface Drilling and Sampling.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Windows, Hardware, Glazing.
Division 09 -	Finishes, Flooring, Painting and Coating.
Division 10 -	Specialties, Signage, Safety Specialties, Lockers, Flagpoles.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 13 -	Special Construction.
Division 14 -	Conveying Equipment, Lifts.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Plumbing Piping, Plumbing Equipment.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Air Terminal Units.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exterior Lighting.
Division 27 -	Communications, Data Communications, Audio-Video Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Video Surveillance, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Irrigation, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wells, Wastewater Utility Pumping Stations, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping, Instrumentation and Control for Process Systems.
Division 41 -	Material Processing and Handling Equipment, Bulk Material Processing Equipment, Bulk Material Conveying Equipment, Bulk Material Feeders, Conveyors, Cranes and Hoists.
Division 44 -	Pollution and Waste Control Equipment, Odor Treatment Equipment, Water Pollution Control Equipment, Water Pollution Containment and Cleanup Equipment.
Division 46 -	Water and Wastewater Equipment, Common Work Results for Water and Wastewater Equipment, Water and Wastewater Preliminary Treatment Equipment, Water and Wastewater Chemical Feed Equipment, Water and Wastewater Clarification and Mixing Equipment, Water and Wastewater Secondary Treatment Equipment, Water and Wastewater Advanced Treatment Equipment, Water and Wastewater Residuals Handling and Treatment.