Air Handling Unit and Air Duct Cleaning and Sealing

The Naval Surface Warfare Center, Philadelphia Division intends to initiate a Request for Proposal (RFP) to procure duct cleaning and sealing of facility air handing units (AHU) for Building 77L. Work shall take place on weekdays from 0600 to 1500; however, dependent on critical mission impact, work outside of regular business hours may be necessary or during the weekend. Work outside of the listed is dependent on Government approval and limited by Government Oversight. All administrative and office environments within the limits of work must be returned to their original condition by 0500 of the next business day unless otherwise approved by the TPOC or Contracting Officer. Period of performance is 60 Days after receipt of Notice to Proceed for the base work, which is units AC-1 (Return Fan), AC-1 S-1, AC-1 S-2, AC-2, RTU-1 and an additional 30 Days for the optional work, which is for clean and seal Air Handling Units AC-1 S-3, AC-3, AC-4 Partial, AC-5, AC-7, AC-9, Rooftop Unit , if the option is exercised, for a total of 90 Days. FAR Clause 52.228-1 Bid Guarantee will be included. Performance and Payment bonding is a requirement for this procurement and Liquidated Damages are applicable. The acquisition will be a negotiated, best-value procurement using the Contracting by Negotiation process prescribed in FAR 15.101-2. The source selection process will be based on a Lowest Price, Technically Acceptable (LPTA) evaluation. The evaluation factors are expected to be: 1) Bonding and Certifications, 2) Past Performance, and 3) Price. Offerors will be required to submit an active National Air Duct Cleaning Association (NADCA) certification for the prime or subcontractor that will perform onsite duct cleaning and sealing and an active Air Systems Cleaning Specialist (ASCS) certification for its proposed onsite supervisor. Narratives must clearly demonstrate acceptability in enough detail for the Government to understand whether the proposal meets or exceeds the minimum solicitation requirements. Detailed evaluation criteria will be included in the RFP package. Initial price proposals must be submitted along with initial technical proposal to the Contracting Officer in accordance with the requirements of the RFP. Offerors are advised that the Government intends to award a contract based on initial proposals received without discussions or any contact concerning the proposal received. Therefore, each proposal should contain the offeror's best terms. The Government reserves the right to hold discussions at its discretion. The solicitation N6449823R4025 is expected to be issued on or about 30 JAN 2023 with a closing date on or about 02 MAR 2023. The official media ot distribution tor this RFP is at SAM.gov. Contractors may download the solicitation (including any attachments) and any amendments via the SAM.gov website on or after the issue date. It is the offeror's responsibility to monitor the SAM.gov website for any amendments. All contractors are required to be registered in the System for Award Management (SAM) before award as required by FAR 4.1102. Firms are required by legislation to submit an annual VETS-4212 Report on your employment of targeted veterans. Information on submitting your report may be obtained by accessing the following internet web site: https://www.dol.gov/agencies/vets/programs/vets4212#howtofile The method of contractor selection has not been determined at this time.

Division 03 -	Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 12 -	Furnishings, Window Treatments, Casework, Office Furniture, Multiple Seating.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems.
Division 22 -	Plumbing, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Planting Irrigation, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.