$160M LRD Metal Fabrication, Refurbishment, and Installation Multiple Award Task Order Contracts (MATOCS)

Supply contract including incidental construction for various Metal Fabrication, Refurbishment, and Installation projects located within the Great Lakes and Ohio River Division (LRD). FABRICATION PRODUCTS: The fabrication and/or refurbishment to be included under this contract may include, but is not limited to the following: miter gates, tainter gates, vertical lift gates, roller gates, flap gates, emergency gates, spillway gates, skin sheets, gate anchorages, lock bulkheads, dam bulkheads, emergency bulkheads, culvert bulkheads, culvert valves, stop logs, floating mooring bitts, bridges, jib cranes, spillway cranes, intake cranes, barge cranes, bulkhead cranes, intake screens, screen bars, hydraulic cylinders, open gears, gear boxes, hydro gantry cranes, tailrace gantry cranes, maintenance cranes, hydro headgates, and trash racks. Contractor must provide secure and appropriate ventilated storage area for short-term storage of fabricated item(s) as required per delivery order. Installation of the above-mentioned fabricated components may include but is not limited to the utilization of marine equipment, land-based cranes and floating cranes to access the lock and dam, floating risk management facilities, and other facilities. Fabrications may be very large and have to be installed to close tolerances. Installation work may require refurbishment and/or removal and disposal of existing structures. Installation may also require removal of associated components, operating equipment, or structures to install fabricated parts, and subsequent replacement of those removed parts. Installation will be completed by skilled trades and will be subject to wage rates identified per delivery order, when applicable. MATOC proposal submission, each fabricating plant and fabricator shall be certified under the AISC Quality Certification Program with a Fracture Critical Endorsement (FCE) with Sophisticated Paint Endorsement (SPE), and one of the following certifications: - Certified Bridge Fabricator – Intermediate (IBR) - Certified Bridge Fabricator – Advanced (ABR) - Certified Hydraulic Fabricator (HYD) pre-2020 certified - Certified Advanced Hydraulic Fabricator (HYDA)

Misc. Buildings, Renovation.

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Flooring, Carpeting, Acoustic Treatment, Painting.
Division 12 -	Furnishings.
Division 21 -	Fire Suppression, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Irrigation, Planting.
Division 33 -	Utilities.