Design/Build Hangar

Design and construction of an airplane hangar to be built at the Camilla-Mitchell County Airport, Camilla, Georgia Furnish and deliver one 85' (width) x 60' (length) x 19' (eave height) clear span enclosed steel building. There will also be a 24' (width) x 12' (Length) x 24'1" (eave height) enclosed steel building attached on one 85' end. The ridge line will be the same for both buildings so that the overall ridge line will be 72' long. There will be one 60' (width) x 18' (height) framed opening. One 14' (width) x 16' (height) 2500 series rollup door and one 12' (width) x 12' (height) 2500 series rollup. There will also be one 3070 man door. Both buildings will be insulated with a 3" R-10 VRR Insulation in the roof only. Gutter and downspouts will be required on both buildings along with 8' tall white linear panels around the inside of the 85'x60' with the following: Gabled Roof 2/12 Roof Pitch 3-20' Bay Spacings 1-12' Bay Spacings 26 Gauge PBR Galvalume Roof Panels 26 Gauge Color Trim 26 Gauge Color Gutter and downspouts Bolt Placement Drawings, Anchor Bolts Included Engineered Stamped metal building drawings Engineered Stamped foundation design for buildings (4" slab) Erection of buildings including all equipment needed Installation of slab

Division 03 -	Concrete, Concrete Forming, Structural Cast-in-Place Concrete Forming, Concrete Reinforcing.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 09 -	Finishes, Painting.
Division 10 -	Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers.
Division 13 -	Special Construction, Fabricated Engineered Structures, Metal Building Systems.
Division 21 -	Fire Suppression.
Division 31 -	Earthwork, Site Clearing, Grading.
Division 32 -	Exterior Improvements, Rigid Paving, Concrete Paving, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.